AudioRoundTable.com: Craftsmen » Non Metalic Chassis

Home » Audio » Craftsmen » Non Metalic Chassis

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Tubes and wood. [message #29957 is a reply to message #29952]

Thu, 27 December 2007 15:42

Jeffery L
Messages: 13
Registered: May 2009

Chancellor

What would stop you from you using phenolic sheet? It seems the mechanical and electric properties would be ideal. What would also stop you from using a thin copper, aluminum, or steel sheet on the underside of the chassis for shielding or ground if needed?

Report message to a moderator

[Message index]

		Non Metalic Chassis By: SteveBrown on Tue, 20 November 2007 17:52
		Re: Non Metalic Chassis By: Wayne Parham on Tue, 20 November 2007 20:47
		Re: Non Metalic Chassis By: SteveBrown on Wed, 21 November 2007 05:47
		Re: Non Metalic Chassis By: Wayne Parham on Wed, 21 November 2007 13:05
		Re: Wiggle Wood By: Bill Epstein on Thu, 22 November 2007 05:15
		Re: Wiggle Wood By: SteveBrown on Thu, 22 November 2007 07:21
		Tubes and wood. By: Shane on Thu, 22 November 2007 23:06
		Re: Tubes and wood. By: Jeffery L on Thu, 27 December 2007 15:42
		Re: Tubes and wood. By: Shane on Thu, 27 December 2007 17:39
		Re: Tubes and wood. By: Jeffery L on Fri, 28 December 2007 06:54
		Re: Non Metalic Chassis By: RC Daniel on Fri, 08 August 2008 00:26

Previous Topic:	Octal Phono
Next Topic:	any stocks of Live Oak up north?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Sep 21 19:56:19 CDT 2024