AudioRoundTable.com: Craftsmen » Smith Horns, pt2: Vanes in Vain

Home » Audio » Craftsmen » Smith Horns, pt2: Vanes in Vain

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Poopular. [message #29528 is a reply to message #29527]

Wed, 15 June 2005 10:12

GarMan
Messages: 960
Registered: May 2009

Illuminati (2nd Degree)

"Workability" is relative. Compared to the stacked baltic ply for my first attempt, the poplar was very easy to carve. I thought of using MDF but did not want to deal with the dust. All other wood types were too expensive for this project so I ended up using the poplar by default.

This attempt was my "mock-up" to see if I like the sound. All signs are pointing in that direction, so when I re-do this later this summer, I'll be opening the wallet for solid maple or cherry.

gar.

Report message to a moderator

[Message index]

		Smith Horns, pt2: Vanes in Vain By: GarMan on Tue, 14 June 2005 08:34
		Maniac. By: Poindexter on Tue, 14 June 2005 09:52
		Re: Maniac. By: GarMan on Tue, 14 June 2005 10:31
		Re: Maniac. By: zincman on Tue, 14 June 2005 10:49
		Poopular. By: Poindexter on Tue, 14 June 2005 20:43
		Re: Poopular. By: GarMan on Wed, 15 June 2005 10:12
		Ooh! By: Poindexter on Wed, 15 June 2005 22:16
		Re: Smith Horns, pt2: Vanes in Vain By: Wayne Parham on Tue, 14 June 2005 18:05

Previous Topic:	Smith Horns, pt1
Next Topic:	Chinese Walnut Plywood

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Jul 23 00:11:23 CDT 2024