AudioRoundTable.com: Craftsmen » Cutting a cut-out in 40mm maple

Home » Audio » Craftsmen » Cutting a cut-out in 40mm maple

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Cutting a cut-out in 40mm maple - Done! [message #29147 is a reply to message #29127]

Wed, 07 July 2004 12:30

Brian C.
Messages: 4
Registered: May 2009

Esquire

After marking out I drilled a few 10mm holes at strategic points and cut the thing easy-pleasy with my humble B&D jigsaw. No broken blade, no burnt-out motor. Phew, what a relief!

Now I need 3 temporary supports until my roller bearings show up...
I'll try an put a photo up when everything is finished.

Brian.

Report message to a moderator

[Message index]

		Cutting a cut-out in 40mm maple By: Brian C. on Tue, 29 June 2004 03:16
		Can you describe what the template looks like? (nt) By: GarMan on Tue, 29 June 2004 07:26
		Re: Cutting a cut-out in 40mm maple By: Bill Fitzmaurice on Tue, 29 June 2004 14:23
		Re: Cutting a cut-out in 40mm maple By: Bill Martinelli on Tue, 29 June 2004 16:58
		Black and Decker By: Bill Fitzmaurice on Tue, 29 June 2004 20:57
		Re: I figgered out that's 1 1/2", yes? By: BillEpstein on Tue, 29 June 2004 19:08
		Re: I figgered out that's 1 1/2", yes? By: Bill Martinelli on Tue, 29 June 2004 20:18
		It is a prerequisite to be named Bill to understand this stuff? (nt) By: GarMan on Tue, 29 June 2004 19:48
		Thanks to both Bills! By: Brian C. on Wed, 30 June 2004 10:20
		Cutting a cut-out in 40mm maple - Done! By: Brian C. on Wed, 07 July 2004 12:30

Previous Topic:	Modular Speakers
Next Topic:	Anybody here using the Forrest WW II ?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Feb 16 14:22:44 CST 2025