AudioRoundTable.com: Craftsmen » Cutting a cut-out in 40mm maple

Home » Audio » Craftsmen » Cutting a cut-out in 40mm maple

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Thanks to both Bills! [message #29141 is a reply to message #29127]

Wed, 30 June 2004 10:20

Brian C.
Messages: 4
Registered: May 2009

Esquire

I'm taking a leaf out of the book of a friend who has just sunk a sink unit and a cooker hob into a worksurface - I'm going to start off with a hole-saw bit in my power drill, then will come the jigsaw (just purchased some more blades!) and finally finish with the router.

The template is a copy of the original Garrard print on a large sheet of paper. The dimensions are slightly out but it does state what the measurements between centres should be for the mounting holes so I should be able to get it down accurately.

I'm afraid over here in the UK it is not easy to find a helpful pro shop these days :o(

In the fullness of time a picture will appear....

Brian.

Report message to a moderator

[Message index]

		Cutting a cut-out in 40mm maple By: Brian C. on Tue, 29 June 2004 03:16
		Can you describe what the template looks like? (nt) By: GarMan on Tue, 29 June 2004 07:26
		Re: Cutting a cut-out in 40mm maple By: Bill Fitzmaurice on Tue, 29 June 2004 14:23
		Re: Cutting a cut-out in 40mm maple By: Bill Martinelli on Tue, 29 June 2004 16:58
		Black and Decker By: Bill Fitzmaurice on Tue, 29 June 2004 20:57
		Re: I figgered out that's 1 1/2", yes? By: BillEpstein on Tue, 29 June 2004 19:08
		Re: I figgered out that's 1 1/2", yes? By: Bill Martinelli on Tue, 29 June 2004 20:18
		It is a prerequisite to be named Bill to understand this stuff? (nt) By: GarMan on Tue, 29 June 2004 19:48
		Thanks to both Bills! By: Brian C. on Wed, 30 June 2004 10:20
		Cutting a cut-out in 40mm maple - Done! By: Brian C. on Wed, 07 July 2004 12:30

Previous Topic:	Modular Speakers
Next Topic:	Anybody here using the Forrest WW II ?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Jun 18 07:48:50 CDT 2024