AudioRoundTable.com: Craftsmen » How Thick is Thick Enough?

Home » Audio » Craftsmen » How Thick is Thick Enough?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: One half inch. [message #29140 is a reply to message #29134]

Tue, 29 June 2004 21:01

Bill Fitzmaurice
Messages: 335
Registered: May 2009

Grand Master

By and large why you see a lot of inch and better MDF being used by the industry is because even with the higher shipping costs it's still cheaper to use than bracing, which is a more labor intensive and therefore more expensive solution. For DIY where labor costs are zip bracing is a much better alternative.

Report message to a moderator

[Message index]

		How Thick is Thick Enough? By: GarMan on Mon, 28 June 2004 14:58
		Re: How Thick is Thick Enough? By: elektratig on Tue, 29 June 2004 04:42
		Re: How Thick is Thick Enough? By: GarMan on Tue, 29 June 2004 07:22
		Re: How Thick is Thick Enough? By: elektratig on Tue, 29 June 2004 12:37
		One half inch. By: Bill Fitzmaurice on Tue, 29 June 2004 14:30
		Re: One half inch. By: GarMan on Tue, 29 June 2004 15:14
		Re: One half inch. By: Bill Fitzmaurice on Tue, 29 June 2004 21:01
		Re: One half inch. By: Bill Martinelli on Wed, 30 June 2004 22:54

Previous Topic:	So you want to move the volume pot to the rear?
Next Topic:	Modular Speakers

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Nov 21 18:54:24 CST 2024