AudioRoundTable.com: Pro Sound » amps and extension cabs

Home » Audio » Pro Sound » amps and extension cabs

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

amps and extension cabs [message #27648]

Fri, 06 February 2009 14:23

Stuart John Lawrence is currently offline

Stuart John Lawrence
Messages: 1
Registered: May 2009

Esquire

Hi can you help?
I have a Marshall 18W 1974 with a 16ohm spkr-but there is a swith for 4-8 - and 16 ohms
I want to run my extn cab rated at 8 ohms with it - what do i set the switch to? thanks Stuart

same question for a vibrolux running two 8 ohmd spkrs so 4 ohms amp says not to run below 2 ohms -can i use the 8 ohm extn and the built in spkrs at the same time ?

Report message to a moderator

[Message index]

		amps and extension cabs By: Stuart John Lawrence on Fri, 06 February 2009 14:23
		Re: amps and extension cabs By: Wayne Parham on Mon, 09 February 2009 12:05

Previous Topic:	Fender Performer 1000 problem
Next Topic:	4-10 bass cab inductor

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Nov 25 01:55:45 CST 2024