AudioRoundTable.com: General » Jensen RP103 Orientation

Home » Audio » General » Jensen RP103 Orientation

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Jensen RP103 Orientation [message #26739 is a reply to message #26738]

Thu, 15 January 2009 23:44

Wayne Parham
Messages: 18791
Registered: January 2001

Illuminati (33rd Degree)

If you can see or feel the diaphragm, you can possibly tell what direction it is moving when a small voltage is applied. You can connect a 1.5v battery across the terminals and see what direction the diaphragm moves. This is simple on cone or dome tweeters, but not so easy on compression drivers and horns. In that case, you need acoustic measurement equipment.

Report message to a moderator

[Message index]

		Jensen RP103 Orientation By: gfederys on Wed, 14 January 2009 12:54
		Re: Jensen RP103 Orientation By: Wayne Parham on Thu, 15 January 2009 11:11
		Re: Jensen RP103 Orientation By: gfederys on Thu, 15 January 2009 12:34
		Re: Jensen RP103 Orientation By: Wayne Parham on Thu, 15 January 2009 23:44
		Re: Jensen RP103 Orientation By: gfederys on Fri, 16 January 2009 08:48
		Measurement gear By: Wayne Parham on Fri, 16 January 2009 11:47

Previous Topic:	HELP....What ohm are these Utah speakers?
Next Topic:	Western Electric output transformers

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 30 09:51:09 CST 2024