AudioRoundTable.com: General » matching horns for the University reflex drivers.

Home » Audio » General » matching horns for the University reflex drivers.

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: matching horns for the University reflex drivers. [message #26475 is a reply to message #26472]

Mon, 20 March 2006 21:00

Bill Hanuschak
Messages: 1
Registered: May 2009

Esquire

Hello,
I have never replied to one of these before so I hope it works, any way the Cobra Flex II horn is a a 1 3/8 threaded horn and it does work very well. I have only seen it used with University sound drivers though.
When I worked for Altec/University sound I did a lot of testing with that horn and drivers. The problem is all the US drivers only played out to about 5 to 6 Khz so I can tell you they work well as a midrange horn they have a very smooth response using drivers like the ID40 and ID60. The ID30 works pretty good but I would go either of the first two.
I may have some old spec sheets at work if you wanted to call me at 405-789-0221.

Best Regards,
Bill Hanuschak
Great Plains Audio

Report message to a moderator

[Message index]

		matching horns for the University reflex drivers. By: Keisuke Aoyagi on Thu, 16 March 2006 03:15
		Re: matching horns for the University reflex drivers. By: Bill Hanuschak on Mon, 20 March 2006 21:00
		Thanks for the assist Bill! By: spkrman57 on Thu, 20 April 2006 06:48

Previous Topic:	Philco stereophonic high fidelity
Next Topic:	goodmans eleganzia

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Nov 27 22:57:24 CST 2024