AudioRoundTable.com: Speaker » another ART array question....

Home » Audio » Speaker » another ART array question....

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: another ART array question.... [message #23576 is a reply to message #23568]

Tue, 20 March 2007 04:02

FredT
Messages: 704
Registered: May 2009

Illuminati (1st Degree)

The quick disconnects are designed to be attached to the wires using a crimping too. Another option would be to solder the wires directly to the speaker terminals, but I prefer to use the quick disconnects at least until I'm certain I will not be pulling the speakers.

If you want to upgrade the internal wiring, 12 ga Belden 5000UE cable is available from Blue Jeans cable for 38 cents/ft. It's a neutral sounding high purity copper. You will have to strip off the outer cover, but there's a "zip cord" inside that makes it very easy.

Report message to a moderator

[Message index]

		another ART array question.... By: blake on Sat, 17 March 2007 14:05
		Re: another ART array question.... By: blake on Sat, 17 March 2007 14:47
		Re: another ART array question.... By: FredT on Tue, 20 March 2007 04:02
		Re: another ART array question.... By: blake on Tue, 20 March 2007 23:12
		Re: another ART array question.... By: Wayne Parham on Wed, 21 March 2007 09:29

Previous Topic:	No power from my Wharfdale Active Pro 8.2 speaker
Next Topic:	possible blown woofer? help?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Nov 25 18:23:44 CST 2024