Home » Audio » Speaker » Newform R30 Scanspeak 18W/8545 array project
Re: Newform R30 Scanspeak 18W/8545 array project [message #23427 is a reply to message #23341] Tue, 06 February 2007 20:40 Go to previous message
Stephen Narayan is currently offline  Stephen Narayan
Messages: 9
Registered: May 2009
Esquire
Change in plans, I will be using a Cyrus III integrated amp and a Cyrus Power amp, this gives me 4 channels of 70Wrms into 4 Ohms which is what a 66"-72" 6 driver per side array with 2 R30's per side would give me...

Any thoughts on this amplifier setup to go with my DCX2496?

Also recently I've been having a hum issue with the Behringer which is feeding my Logans (biamp) and my subs. The sound only comes through the sub channels. I'm not quite sure if it's the XLR cable's at this point, the connectors or internal in the processor on those channels. Anyone ever come across this?

I've been looking at other digital crossovers but I can't cost justify the expense of the DEQx yet. Though it looks lovely in black

 
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Please recommend a smooth 18" x 8" HF horn & driver...
Next Topic: Array Enclosure Plans ie Northcreek Designs
Goto Forum:
  


Current Time: Tue Jul 16 13:44:06 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest