AudioRoundTable.com: Speaker » Inspired by the McIntosh XRT2K

Home » Audio » Speaker » Inspired by the McIntosh XRT2K

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Inspired by the McIntosh XRT2K [message #23405 is a reply to message #23404]

Wed, 24 January 2007 09:29

justinc
Messages: 32
Registered: May 2009

Baron

check www.zaphaudio.com for reviews. remember with 45 your sensitivity will inccrease to 90db and your distortion almost non existant. much different than if you are measuring a single driver. since you are using a dcx you can also implement a steep xover slope.

Report message to a moderator

[Message index]

		Inspired by the McIntosh XRT2K By: Attila on Tue, 23 January 2007 10:53
		Re: Inspired by the McIntosh XRT2K By: Marlboro on Tue, 23 January 2007 20:48
		Re: Inspired by the McIntosh XRT2K By: Attila on Wed, 24 January 2007 07:51
		Re: Inspired by the McIntosh XRT2K By: justinc on Wed, 24 January 2007 07:58
		Re: Inspired by the McIntosh XRT2K By: Attila on Wed, 24 January 2007 08:24
		Re: Inspired by the McIntosh XRT2K By: justinc on Wed, 24 January 2007 09:29
		Re: Inspired by the McIntosh XRT2K By: Attila on Thu, 25 January 2007 03:26
		Re: Inspired by the McIntosh XRT2K By: justinc on Thu, 25 January 2007 05:09
		Re: Inspired by the McIntosh XRT2K By: Attila on Thu, 25 January 2007 06:09
		Re: Inspired by the McIntosh XRT2K By: justinc on Thu, 25 January 2007 15:47
		Re: Inspired by the McIntosh XRT2K By: Attila on Fri, 26 January 2007 03:03
		Re: Inspired by the McIntosh XRT2K By: Anonymous on Fri, 26 January 2007 10:01
		Re: Inspired by the McIntosh XRT2K By: Marlboro on Wed, 24 January 2007 17:43
		Re: Inspired by the McIntosh XRT2K By: Anonymous on Tue, 23 January 2007 23:47
		Problems with the RD75? By: Marlboro on Wed, 24 January 2007 06:45
		Re: Inspired by the McIntosh XRT2K By: justinc on Wed, 24 January 2007 07:53
		Re: Inspired by the McIntosh XRT2K By: Attila on Wed, 24 January 2007 08:09
		Re: Inspired by the McIntosh XRT2K By: Anonymous on Wed, 24 January 2007 10:00
		Re: Inspired by the McIntosh XRT2K By: auplater on Wed, 24 January 2007 16:26
		Re: Inspired by the McIntosh XRT2K By: Anonymous on Wed, 24 January 2007 16:40
		Re: Inspired by the McIntosh XRT2K By: Attila on Thu, 25 January 2007 03:35
		Re: Inspired by the McIntosh XRT2K By: auplater on Thu, 25 January 2007 19:20
		Good link By: Renato on Tue, 30 January 2007 17:36

Previous Topic:	Needles a Great Success!
Next Topic:	Word document for cutting flange of Neo Tweeters

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Aug 13 15:52:46 CDT 2024