AudioRoundTable.com: Speaker

Home » Audio » Speaker » Needle Array

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Needle Array [message #23297 is a reply to message #23293]

Mon, 06 November 2006 13:38

Danse
Messages: 8
Registered: May 2009

Esquire

Thanks Jim!
Any thoughts on: half of 4/3/2/half of 2/T/half of 2/2/3/half of 4.

A little conserned at the Z = 3.3ohms, just wondering with a passive crossover the inductors should bring the Z up a bit, but would be stable enough for the amp.

Report message to a moderator

[Message index]

		Needle Array By: Danse on Sun, 05 November 2006 16:10
		Re: Needle Array By: Jim Griffin on Sun, 05 November 2006 19:17
		Re: Needle Array By: Danse on Mon, 06 November 2006 13:38
		Re: Needle Array By: Jim Griffin on Mon, 06 November 2006 16:12
		Re: Needle Array By: Danse on Tue, 07 November 2006 05:56

Previous Topic:	RAW Acoustics HT3 - Speaker Kit Review
Next Topic:	Acoustic treatment and the nearfield Question

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Sep 17 21:49:06 CDT 2024