AudioRoundTable.com: Speaker » Experiences with Jordan JX53 or Bandor 50 mm in line array?

Home » Audio » Speaker » Experiences with Jordan JX53 or Bandor 50 mm in line array?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Experiences with Jordan JX53 or Bandor 50 mm in line array? [message #22268 is a reply to message #22214]

Thu, 02 September 2004 17:42

7V
Messages: 2
Registered: May 2009

Esquire

Norris, I haven't used Jordan drivers for many years. However, I have designed some mini-array speakers using the Bandor 50mm units and can thoroughly recommend them.

I have designed a TL version (see link below) but my latest design uses the 50mms in a sealed enclosure and accompanies them with separate bass speakers.

Bandor do a 16 ohm version, as well as 8 ohm and 4 ohms. I have used the 8 ohms in the past but prefer the 4 ohms these days as the moving mass is lower and high frequencies better.

Steve Margolis

TL Line Array using Bandor drivers.

Report message to a moderator

[Message index]

		Experiences with Jordan JX53 or Bandor 50 mm in line array? By: Norris Wilson on Sat, 14 August 2004 11:25
		Re: Experiences with Jordan JX53 or Bandor 50 mm in line array? By: 7V on Thu, 02 September 2004 17:42

Previous Topic:	c-t-c formula and tweeter placement
Next Topic:	Line array's

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Jul 09 11:24:58 CDT 2024