AudioRoundTable.com: Speaker » compression horn tweeter

Home » Audio » Speaker » compression horn tweeter

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Driver T/S Specs [message #22187 is a reply to message #22186]

Sun, 01 August 2004 07:49

Bill Fitzmaurice
Messages: 335
Registered: May 2009

Grand Master

There are a minimum of 3 T/S parameters used to derive the anticipated response of a driver, and those are Qts, Vas and Fs. Driver size is not there. Additional parameters can be used to further quantify a driver's probable performance, but the actual driver size is way down on the list. An in depth discussion of how all the parameters affect performance is well beyond the capabilities of a web forum, as that information literally can fill a book- which explains why there are dozens of books written about the subject. If you plan on getting serious at all about this stuff you're going to need at least two on your shelf.

The two most often quoted items regarding driver performance are size and wattage; they are probably the two least significant indicators of potential driver performance.

Report message to a moderator

[Message index]

		compression horn tweeter By: mike erb on Tue, 27 July 2004 21:43
		It won't work. By: Bill Fitzmaurice on Wed, 28 July 2004 13:45
		Re: It won't work. By: mike erb on Wed, 28 July 2004 14:11
		Re: It won't work. By: Bill Fitzmaurice on Wed, 28 July 2004 14:57
		Re: It won't work. By: mike erb on Wed, 28 July 2004 15:29
		Re: It won't work. By: Bill Fitzmaurice on Thu, 29 July 2004 05:38
		Re: It won't work. By: mike erb on Thu, 29 July 2004 10:34
		Re: It won't work. By: Bill Fitzmaurice on Thu, 29 July 2004 11:56
		Re: It won't work. By: mike erb on Thu, 29 July 2004 12:19
		Re: It won't work. By: Bill Fitzmaurice on Fri, 30 July 2004 07:01
		Re:box shape By: mike erb on Sat, 31 July 2004 16:38
		Re:box shape By: Bill Fitzmaurice on Sat, 31 July 2004 19:43
		Re:box shape By: mike erb on Sat, 31 July 2004 20:13
		Driver T/S Specs By: Bill Fitzmaurice on Sun, 01 August 2004 07:49

Previous Topic:	new DIY speaker
Next Topic:	Taking a wild guess here about cross-over design

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Aug 13 00:50:56 CDT 2024