AudioRoundTable.com: Speaker » OPen baffle designs

Home » Audio » Speaker » OPen baffle designs

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: OPen baffle designs [message #21700 is a reply to message #21671]

Wed, 30 August 2006 21:00

hurdy_gurdyman
Messages: 416
Registered: May 2009

Illuminati (1st Degree)

Do you have any specs for those old University Sound drivers? I'm not familiar with them, but most drivers similar to them from that period had very low X-max and probably wouldn't like being eq'd. If they have a highish Q to begin with, they may not even need eq'ing.
Without knowing the fs and the Qts, it'd be hard to figure out the correct baffle size. Fortunately, it's cheap to buy a sheet of 1/2 inch MDF and experiment.

Dave

Report message to a moderator

[Message index]

		OPen baffle designs By: akhilesh on Mon, 21 August 2006 08:12
		Re: OPen baffle designs By: Wayne Parham on Mon, 21 August 2006 14:37
		A couple of things By: wunhuanglo on Mon, 21 August 2006 17:36
		Re: A couple of things By: Retsel on Mon, 28 August 2006 16:43
		Good advice By: wunhuanglo on Tue, 29 August 2006 03:30
		Re: Good advice By: Retsel on Wed, 30 August 2006 15:25
		Re: OPen baffle designs By: Jim Griffin on Tue, 22 August 2006 19:07
		Re: OPen baffle designs By: akhilesh on Tue, 22 August 2006 20:08
		Re: OPen baffle designs By: hurdy_gurdyman on Wed, 30 August 2006 21:00
		Re: OPen baffle designs By: akhilesh on Wed, 30 August 2006 21:09
		Re: OPen baffle designs By: hurdy_gurdyman on Wed, 30 August 2006 21:48

Previous Topic:	Is it my imagination .....OR
Next Topic:	what are the best small compact speakers you would suggest?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Oct 17 20:50:55 CDT 2024