AudioRoundTable.com: Speaker » Void Filling Foam?

Home » Audio » Speaker » Void Filling Foam?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Void Filling Foam? [message #21563 is a reply to message #21561]

Mon, 05 June 2006 05:44

gfederys
Messages: 46
Registered: May 2009

Baron

Per recommendation on this forum, I just filled voids on a pair of Loather Fidellio's with "Great Stuff" for "Windows and Doors" from Dow. This one doesn't expand as severly as some of the others and is guarenteed NOT to bend the frames of windows and doors. My cabinets were already built, so I drilled 2 5/8 inch hole, one to spray and one for viewing. It worked great, just follow the directions on the can. After it cured, the cabinets didn't ring as much when I did the "knock on wood" test.

Report message to a moderator

[Message index]

		Void Filling Foam? By: Skip on Sat, 03 June 2006 16:18
		Re: Void Filling Foam? By: Scorey on Sat, 03 June 2006 22:12
		Re: Void Filling Foam? By: Wayne Parham on Sun, 04 June 2006 11:29
		Re: Void Filling Foam? By: Skip on Sun, 04 June 2006 19:22
		Re: Void Filling Foam? By: gfederys on Mon, 05 June 2006 05:44
		Re: Void Filling Foam? By: GarMan on Mon, 05 June 2006 09:45
		Thanks All By: Skip on Mon, 05 June 2006 19:25

Previous Topic:	GPAF Treasure
Next Topic:	Mounting an 811 horn

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Nov 28 11:37:30 CST 2024