AudioRoundTable.com: Speaker » In case people have not, please check out the review of a lowther based bass reflex driver on enjoyt

Home » Audio » Speaker » In case people have not, please check out the review of a lowther based bass reflex driver on enjoyt

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

This also works for the FE207E driver [message #19683 is a reply to message #19682]

Wed, 07 January 2004 05:52

DaveJ
Messages: 7
Registered: May 2009

Esquire

I can speak from experience that the Fostex FE207E works exteeeeeemly well in a ported box of about 1 cubic foot. I have the driver mounted on the wide side of the enclosure, similar to Audio Note and Snell speakers. In this case the front baffle is 13"(w)x20"(h). I rear ported mine with a 2" diameter port. I'm still playing with the length for the best in-room sound. The front baffle is 3/4" baltic birch ply. The sides and rear baffle are 3/4" MDF, though I'm going to try 3/4" baltic birch on the rear also.

These mate very well with 2A3 and 300B amps. Being somewhat of a cable sceptic, I was surprised how sensitive these were to different speaker cables though.

DaveJ

Report message to a moderator

[Message index]

		In case people have not, please check out the review of a lowther based bass reflex driver on enjoyt By: akhilesh on Wed, 31 December 2003 10:13
		Re: In case people have not, please check out the review of a lowther based bass reflex driver on en By: JLM on Fri, 02 January 2004 05:33
		Re: In case people have not, please check out the review of a lowther based bass reflex driver on en By: akhilesh on Fri, 02 January 2004 10:37
		Re: In case people have not, please check out the review of a lowther based bass reflex driver on en By: jim denton on Mon, 05 January 2004 16:07
		Recommendations for Fostex FE206E driver By: akhilesh on Tue, 06 January 2004 14:13
		This also works for the FE207E driver By: DaveJ on Wed, 07 January 2004 05:52
		Re: This also works for the FE207E driver By: akhilesh on Wed, 07 January 2004 06:45
		Re: This also works for the FE207E driver By: DaveJ on Wed, 07 January 2004 07:06
		lenth of port for your FE207E By: akhilesh on Wed, 07 January 2004 09:59
		Re: lenth of port for your FE207E By: DaveJ on Wed, 07 January 2004 10:58
		Re: lenth of port for your FE207E By: IanJ on Sun, 01 February 2004 02:23
		Re: Recommendations for Fostex FE206E driver By: jim denton on Wed, 04 February 2004 12:37

Previous Topic:	new forum.............
Next Topic:	Hey guys...how about posting some pics of your speakers

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Jul 17 07:31:54 CDT 2024