AudioRoundTable.com: Speaker » Pro Sound Driver Sensitivity

Home » Audio » Speaker » Pro Sound Driver Sensitivity

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Pro Sound Driver Sensitivity [message #17615 is a reply to message #17609]

Mon, 28 February 2005 16:38

Bill Fitzmaurice
Messages: 335
Registered: May 2009

Grand Master

True, and the resulting high fs and low Qts quite often will result in cent 3: No bass. Unless you put them in horns or other boxes that can bring the bass response up, that is. Newbies very often toss pro-sound drivers into inadequate boxes and are puzzled why they have no bass response. The steps required to gain high sensitivity is why.

Report message to a moderator

[Message index]

		Pro Sound Driver Sensitivity By: FredT on Mon, 28 February 2005 13:45
		Re: Pro Sound Driver Sensitivity By: akhilesh on Mon, 28 February 2005 14:35
		Re: Pro Sound Driver Sensitivity By: Bill Fitzmaurice on Mon, 28 February 2005 16:38
		Re: Pro Sound Driver Sensitivity By: akhilesh on Tue, 01 March 2005 07:33
		But you get used to the size By: GarMan on Tue, 01 March 2005 09:47
		Re: But you get used to the size By: Mike.e on Tue, 01 March 2005 18:45
		Hoffmans Iron Law By: Bill Fitzmaurice on Fri, 04 March 2005 12:20
		Re: Pro Sound Driver Sensitivity my 3.5 cents By: Bill Wassilak on Tue, 01 March 2005 13:45
		Re: Duhh lets try my 3.5 cents again By: Bill Wassilak on Tue, 01 March 2005 13:57

Previous Topic:	Distortion mechanisms
Next Topic:	fostex driver /cab design

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Aug 03 18:13:35 CDT 2024