AudioRoundTable.com: Speaker » Horns and Room Size

Home » Audio » Speaker » Horns and Room Size

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Labs Fired Up , Pics on the way [message #17141 is a reply to message #17123]

Sat, 30 October 2004 15:15

pgolde
Messages: 21
Registered: May 2009

Chancellor

Was I supposed to break these things in?
If I have have to do it with the drivers in the horn, my house will break as well.
Ran some test tones and a little music, using my driverack to adjust filters.
This is my first bass horn project, amazing how clean and powerful, easily took all the power my amp had to offer. I am running a Behringer EP2500 through a Driverack PA. The tops are EV DL15x with DH2A (currently passively crossed at 800Hz) powered by an EV P1250 amp. I tripped the power strip breaker playing a 32hz tone at full power and no noticable pop from the Driverack.
I am going to try the sonic impact amps to drive these speakers with batteries from an mp3 player.
Back to my fun, thanks for listening.

Report message to a moderator

[Message index]

		Horns and Room Size By: Gerald59 on Wed, 20 October 2004 18:24
		Re: Horns and Room Size By: Wayne Parham on Thu, 21 October 2004 01:00
		Re: Horns and Room Size By: Bill Fitzmaurice on Thu, 21 October 2004 06:32
		Re: Horns and Room Size - m value, mouth size & length By: tuber on Thu, 21 October 2004 08:20
		M By: Mike.e on Thu, 21 October 2004 23:01
		I don't use M values in my sub horns, By: Bill Fitzmaurice on Fri, 22 October 2004 08:01
		Re: I don't use M values in my sub horns, By: pgolde on Fri, 22 October 2004 10:05
		Re: I don't use M values in my sub horns, By: tuber on Fri, 22 October 2004 10:39
		Re: I don't use M values in my sub horns, By: pgolde on Fri, 22 October 2004 11:05
		No magic just different compromises By: Mike.e on Fri, 22 October 2004 11:47
		Re: I don't use M values in my sub horns, By: pgolde on Fri, 22 October 2004 13:11
		Re: I don't use M values in my sub horns, By: Mike.e on Fri, 22 October 2004 15:32
		Re: I don't use M values in my sub horns, By: pgolde on Fri, 22 October 2004 16:16
		3/4 cams and basshorns By: Wayne Parham on Sat, 23 October 2004 00:45
		Re: 3/4 cams and basshorns By: pgolde on Sat, 23 October 2004 08:34
		Re: 3/4 cams and basshorns By: Wayne Parham on Sat, 23 October 2004 08:49
		Re: 3/4 cams and basshorns By: Mike.e on Sun, 24 October 2004 01:30
		Pay no attention to that man behind the curtain! By: Wayne Parham on Sun, 24 October 2004 05:07
		Or the sub behind the fence By: pgolde on Mon, 01 November 2004 19:02
		Re: Or the sub behind the fence By: Wayne Parham on Mon, 01 November 2004 21:19
		Very cool! By: Mike.e on Sun, 07 November 2004 02:09
		reflex vs. horn By: pgolde on Sun, 07 November 2004 08:43
		Sure thing By: Mike.e on Sun, 07 November 2004 16:56
		Re: I don't use M values in my sub horns, By: Bill Fitzmaurice on Fri, 22 October 2004 14:20
		Pics By: Wayne Parham on Sun, 24 October 2004 08:07
		Re: 3/4 cams and basshorns By: pgolde on Sun, 24 October 2004 20:00
		Re: 3/4 cams and basshorns By: Wayne Parham on Sun, 24 October 2004 23:27
		Labs Fired Up , Pics on the way By: pgolde on Sat, 30 October 2004 15:15
		Re: Labs Fired Up , Pics on the way By: Wayne Parham on Sat, 30 October 2004 15:21
		Re: Labs Fired Up , Pics on the way By: blades976 on Mon, 01 November 2004 18:40
		Re: Labs Fired Up , Pics on the way By: Wayne Parham on Mon, 01 November 2004 21:15
		Re: Labs Fired Up , Pics on the way By: pgolde on Tue, 02 November 2004 11:45
		Re: I don't use M values in my sub horns, By: tuber on Fri, 22 October 2004 10:35
		Re: I don't use M values in my sub horns, By: Bill Fitzmaurice on Fri, 22 October 2004 14:17
		Re: I don't use M values in my sub horns, By: tuber on Tue, 26 October 2004 09:56
		Re: I don't use M values in my sub horns, By: Adrian Mack on Sat, 30 October 2004 00:27
		Re: M By: tuber on Fri, 22 October 2004 10:32
		Ooops By: Mike.e on Fri, 22 October 2004 11:43
		Practically By: Mike.e on Thu, 21 October 2004 05:42
		Re: Practically By: tuber on Thu, 21 October 2004 08:11
		Re: Practically By: Mike.e on Thu, 21 October 2004 22:58
		Re: Practically By: tuber on Fri, 22 October 2004 10:31
		Thank you all for your comments By: Gerald59 on Sun, 24 October 2004 13:47

Previous Topic:	Scan Speaks
Next Topic:	Need Dynaudio Gemini speaker plans and suggestion?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 30 22:39:38 CST 2024