AudioRoundTable.com: Speaker » Horns and Room Size

Home » Audio » Speaker » Horns and Room Size

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: I don't use M values in my sub horns, [message #17113 is a reply to message #17110]

Fri, 22 October 2004 15:32

Mike.e
Messages: 471
Registered: May 2009

Illuminati (1st Degree)

I honestly cant see how effective the bdeap is just by looking at it.Its very boundary dependant.Using the room as the flare doesnt really work due to the large discontinuity between final box flare and room expansion of conical shape.

Using Direct radiator 15"s for 70hz and up is an effective use.
a Hornsubwith a 15" IS a good use of space-but horns are always large.A smaller woofer wont be able to move as much air ;-)

I too like the idea of using cheaper drivers on a longer horn-But by the time you count up the cost of wood + cutting costs its almost the same-and why not use a good linear driver than a cheap one for peace of mind.

If a 10" or 12" will cure your 40hz Hornsub issue then thats really good- i used an 8" for 50hz on 155litres for awhile!

Cheers!
Mike.e

Report message to a moderator

[Message index]

		Horns and Room Size By: Gerald59 on Wed, 20 October 2004 18:24
		Re: Horns and Room Size By: Wayne Parham on Thu, 21 October 2004 01:00
		Re: Horns and Room Size By: Bill Fitzmaurice on Thu, 21 October 2004 06:32
		Re: Horns and Room Size - m value, mouth size & length By: tuber on Thu, 21 October 2004 08:20
		M By: Mike.e on Thu, 21 October 2004 23:01
		I don't use M values in my sub horns, By: Bill Fitzmaurice on Fri, 22 October 2004 08:01
		Re: I don't use M values in my sub horns, By: pgolde on Fri, 22 October 2004 10:05
		Re: I don't use M values in my sub horns, By: tuber on Fri, 22 October 2004 10:39
		Re: I don't use M values in my sub horns, By: pgolde on Fri, 22 October 2004 11:05
		No magic just different compromises By: Mike.e on Fri, 22 October 2004 11:47
		Re: I don't use M values in my sub horns, By: pgolde on Fri, 22 October 2004 13:11
		Re: I don't use M values in my sub horns, By: Mike.e on Fri, 22 October 2004 15:32
		Re: I don't use M values in my sub horns, By: pgolde on Fri, 22 October 2004 16:16
		3/4 cams and basshorns By: Wayne Parham on Sat, 23 October 2004 00:45
		Re: 3/4 cams and basshorns By: pgolde on Sat, 23 October 2004 08:34
		Re: 3/4 cams and basshorns By: Wayne Parham on Sat, 23 October 2004 08:49
		Re: 3/4 cams and basshorns By: Mike.e on Sun, 24 October 2004 01:30
		Pay no attention to that man behind the curtain! By: Wayne Parham on Sun, 24 October 2004 05:07
		Or the sub behind the fence By: pgolde on Mon, 01 November 2004 19:02
		Re: Or the sub behind the fence By: Wayne Parham on Mon, 01 November 2004 21:19
		Very cool! By: Mike.e on Sun, 07 November 2004 02:09
		reflex vs. horn By: pgolde on Sun, 07 November 2004 08:43
		Sure thing By: Mike.e on Sun, 07 November 2004 16:56
		Re: I don't use M values in my sub horns, By: Bill Fitzmaurice on Fri, 22 October 2004 14:20
		Pics By: Wayne Parham on Sun, 24 October 2004 08:07
		Re: 3/4 cams and basshorns By: pgolde on Sun, 24 October 2004 20:00
		Re: 3/4 cams and basshorns By: Wayne Parham on Sun, 24 October 2004 23:27
		Labs Fired Up , Pics on the way By: pgolde on Sat, 30 October 2004 15:15
		Re: Labs Fired Up , Pics on the way By: Wayne Parham on Sat, 30 October 2004 15:21
		Re: Labs Fired Up , Pics on the way By: blades976 on Mon, 01 November 2004 18:40
		Re: Labs Fired Up , Pics on the way By: Wayne Parham on Mon, 01 November 2004 21:15
		Re: Labs Fired Up , Pics on the way By: pgolde on Tue, 02 November 2004 11:45
		Re: I don't use M values in my sub horns, By: tuber on Fri, 22 October 2004 10:35
		Re: I don't use M values in my sub horns, By: Bill Fitzmaurice on Fri, 22 October 2004 14:17
		Re: I don't use M values in my sub horns, By: tuber on Tue, 26 October 2004 09:56
		Re: I don't use M values in my sub horns, By: Adrian Mack on Sat, 30 October 2004 00:27
		Re: M By: tuber on Fri, 22 October 2004 10:32
		Ooops By: Mike.e on Fri, 22 October 2004 11:43
		Practically By: Mike.e on Thu, 21 October 2004 05:42
		Re: Practically By: tuber on Thu, 21 October 2004 08:11
		Re: Practically By: Mike.e on Thu, 21 October 2004 22:58
		Re: Practically By: tuber on Fri, 22 October 2004 10:31
		Thank you all for your comments By: Gerald59 on Sun, 24 October 2004 13:47

Previous Topic:	Scan Speaks
Next Topic:	Need Dynaudio Gemini speaker plans and suggestion?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Jun 16 05:36:43 CDT 2024