AudioRoundTable.com: Speaker » Low BL drivers exhibiting higher power compression

Home » Audio » Speaker » Low BL drivers exhibiting higher power compression

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Thanks Bill [message #17054 is a reply to message #17053]

Wed, 06 October 2004 11:04

Bill Fitzmaurice
Messages: 335
Registered: May 2009

Grand Master

I don't know; there's been some stuff in the Journal recently on high Bl drivers but nothing in relation to horns. This hasn't been that big an issue for horns until fairly recently, as even in the theatrical realm their haven't been many horn loaded subs, and above 80 Hz the problem seldom occurs, due to the lowered excursion requirements. I more or less stumbled on it when I started experimenting with high impedance subs, and only then with high power(over 100 watts)inputs at 60 Hz and lower.

Report message to a moderator

[Message index]

		Low BL drivers exhibiting higher power compression By: Mike.e on Wed, 06 October 2004 06:15
		Re: Low BL drivers exhibiting higher power compression By: Bill Fitzmaurice on Wed, 06 October 2004 06:40
		Thanks Bill By: Mike.e on Wed, 06 October 2004 10:10
		Re: Thanks Bill By: Bill Fitzmaurice on Wed, 06 October 2004 11:04
		Re: Low BL drivers exhibiting higher power compression By: Wayne Parham on Thu, 07 October 2004 06:00
		thanks wayne By: Mike.e on Thu, 07 October 2004 06:21

Previous Topic:	100-600Hz
Next Topic:	Outer dims of Autotuba

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Dec 02 06:59:43 CST 2024