Home » Audio » Speaker » Long throw, Short Throw horns
Re: Long throw, Short Throw horns [message #16844 is a reply to message #16843] Thu, 19 August 2004 07:23 Go to previous message
Bill Fitzmaurice is currently offline  Bill Fitzmaurice
Messages: 335
Registered: May 2009
Grand Master
That's it, more or less, but in reality the idea of short versus long throw is somewhat specious, as there is no difference in how far a 60 degree horn will 'throw' versus a 90 degree horn if they have the same on axis SPL. What does differ is the width of the coverage zone; by and large one wants a wider beam for a shorter throw so that the audience in close and off-axis can hear it. But this whole concept has been rendered somewhat moot in the pro ranks by line-array technology, which addresses the long-throw aspect via nearfield (-3dB per distance doubling from the source)coverage zones up to 300 feet or so deep, and close-in dispersion with curved (J-Line)arrays.

 
Read Message
Read Message
Read Message
Previous Topic: Any ESL/planar to work with Aleph 3?
Next Topic: Modify or remanufacture?
Goto Forum:
  


Current Time: Sat Jul 13 04:56:57 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest