AudioRoundTable.com: Speaker » A horn loaded bass 2 way for me?

Home » Audio » Speaker » A horn loaded bass 2 way for me?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: A horn loaded bass 2 way for me? [message #16031 is a reply to message #16029]

Wed, 14 January 2004 22:35

wunhuanglo
Messages: 912
Registered: May 2009

Illuminati (2nd Degree)

According to Keele (hardly undisputed), the predicted roll-off point in going to be 2*Fs/Qts, which for the Peerless driver is very low, like 130 Hz. According to Fitzmaurice, it'll be good for another octave, but that puts it only up to something on the order of 300 Hz, still way too low.

Check out something like the 3820 - http://www.phlaudio.com/main.html

I would advise to to forget reaching up to 1500 Hz in a horn loaded two-way: it ain't going to happen from what I see. Your best bet is to go no higher than 400 or 500 Hz. BMS drivers an get you there pretty cheap: http://www.woodhorn.com/BMS/bms_compressiondrivers.htm

Report message to a moderator

[Message index]

		A horn loaded bass 2 way for me? By: BillEpstein on Wed, 14 January 2004 21:52
		Re: A horn loaded bass 2 way for me? By: Mike.e on Wed, 14 January 2004 21:54
		Re: A horn loaded bass 2 way for me? By: Adrian Mack on Thu, 22 January 2004 07:38
		Re: A horn loaded bass 2 way for me? By: wunhuanglo on Wed, 14 January 2004 22:35
		Re: A horn loaded bass 2 way for me? By: Wayne Parham on Thu, 15 January 2004 00:44
		Re: A horn loaded bass 2 way for me? By: GraemeG on Thu, 15 January 2004 01:07

Previous Topic:	Directivity and modeling.
Next Topic:	You can boil'm, fry'm, broil'm, gumbo'm, saute'm........

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Nov 18 13:25:59 CST 2024