AudioRoundTable.com: Speaker » Need help with a center channel

Home » Audio » Speaker » Need help with a center channel

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Thank you both. [message #15436 is a reply to message #15435]

Sun, 17 December 2006 21:57

Duke
Messages: 297
Registered: May 2009

Grand Master

To model two drivers with a computer program that doesn't allow me to enter two drivers, I just double the Vas. The other parameters stay the same.

Or you can model one and then just double the box size. If it's a vented box, to keep the same tuning frequency double the port area but keep the same port length.

Duke

Report message to a moderator

[Message index]

		Need help with a center channel By: Forty2wo on Fri, 15 December 2006 16:21
		Re: Need help with a center channel By: Duke on Sat, 16 December 2006 03:34
		Thank you both. By: Forty2wo on Sun, 17 December 2006 21:03
		Re: Thank you both. By: Duke on Sun, 17 December 2006 21:57
		Re: Need help with a center channel By: Bob Brines on Sun, 17 December 2006 05:45
		Re: Need help with a center channel By: Dr Mark Carter on Mon, 18 December 2006 21:36
		Re: Need help with a center channel By: Forty2wo on Wed, 20 December 2006 19:28

Previous Topic:	Dynauido crosover design
Next Topic:	Zu tone or Druid or which Omega to match 300B?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Feb 17 17:17:15 CST 2025