AudioRoundTable.com: Speaker

Home » Audio » Speaker » Dynaco A25

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Well; the drivers and xover cost 268$. Cheap for what you get [message #15255 is a reply to message #15247]

Tue, 11 April 2006 04:17

dB
Messages: 234
Registered: May 2009

Master

Hi,
Any idea of the value of the filter components?
I found a page with the crossovers on Tlinespeakers, it says the crossing is at 1K but it doesn't show inductance value for woofer filter on the A50 Dynaco classic.
Best Regards

1kHz XO - DYNACO

Report message to a moderator

[Message index]

		Dynaco A25 By: Manualblock on Wed, 08 March 2006 19:40
		Re: Dynaco A25 By: Wayne Parham on Thu, 09 March 2006 09:20
		Re: Dynaco A25 By: akhilesh on Mon, 20 March 2006 08:30
		Re: Dynaco A25 By: Manualblock on Mon, 20 March 2006 09:32
		Re: Dynaco A25 By: akhilesh on Tue, 21 March 2006 09:56
		Re: Dynaco A25 By: Manualblock on Tue, 21 March 2006 10:10
		I found it By: akhilesh on Tue, 21 March 2006 12:25
		Re:You Just Buy The Driver Kit; Don't Ship The Cabs. By: Manualblock on Tue, 21 March 2006 12:56
		IMO, for the $$$, stick with a used pair.. By: marc-homeslice on Mon, 27 March 2006 10:17
		Re: Well; the drivers and xover cost 268$. Cheap for what you get By: Manualblock on Mon, 27 March 2006 14:25
		Huh.. woofers are exactly 9.75".. By: marc-homeslice on Mon, 27 March 2006 15:27
		Re: Huh.. woofers are exactly 9.75".. By: Manualblock on Mon, 27 March 2006 15:35
		cool..i've been doing a little searching.. By: marc-homeslice on Mon, 27 March 2006 15:49
		Re: cool..i've been doing a little searching.. By: Manualblock on Mon, 27 March 2006 17:27
		Re: Well; the drivers and xover cost 268$. Cheap for what you get By: dB on Tue, 11 April 2006 04:17

Previous Topic:	AudioRoundTable Archive
Next Topic:	Need help with my first build project

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Nov 27 13:06:34 CST 2024