AudioRoundTable.com: Source » repalcing belt on sony ps-lx250h

Home » Audio » Source » repalcing belt on sony ps-lx250h

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: repalcing belt on sony ps-lx250h [message #13058 is a reply to message #13056]

Mon, 14 August 2006 16:13

Wayne Parham
Messages: 18793
Registered: January 2001

Illuminati (33rd Degree)

Does the platter have a rubber mat? If so, remove it and check underneath for a couple of access holes. If there are holes in the platter and you can see the base through it, you can access the belt and put it in place. Just rotate the platter and thread the belt into position.

Report message to a moderator

[Message index]

		repalcing belt on sony ps-lx250h By: jmarwil on Mon, 14 August 2006 11:41
		Re: repalcing belt on sony ps-lx250h By: Wayne Parham on Mon, 14 August 2006 16:13
		Re: repalcing belt on sony ps-lx250h By: Paul C. on Sat, 19 August 2006 17:59

Previous Topic:	Turntable problem
Next Topic:	Just got my SME arm back from re-wire. Hubba Hubba!

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Dec 22 08:56:54 CST 2024