AudioRoundTable.com: Source » Grados,ortophons,shures and AR turntable hum

Home » Audio » Source » Grados,ortophons,shures and AR turntable hum

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Grados,ortophons,shures and AR turntable hum [message #12463 is a reply to message #12461]

Tue, 16 August 2005 17:15

Manualblock
Messages: 4973
Registered: May 2009

Illuminati (13th Degree)

Say Russell; do you have both ground wires connected? and if so how does it do if you remove one of them? Have you tried swapping the positive leads on the cartridge pins? And hum is usually simple in Turntables; so are all the wires tight and have continuity? I have had that happen before, loose wire.

Report message to a moderator

[Message index]

		Grados,ortophons,shures and AR turntable hum By: Russellc on Tue, 16 August 2005 12:01
		Re: Grados,ortophons,shures and AR turntable hum By: Dominic on Tue, 16 August 2005 13:45
		Re: Grados,ortophons,shures and AR turntable hum By: Chris Denyer on Wed, 17 August 2005 06:01
		Re: Grados,ortophons,shures and AR turntable hum By: Russellc on Wed, 17 August 2005 12:28
		Re: Grados,ortophons,shures and AR turntable hum By: Manualblock on Tue, 16 August 2005 17:15
		Re: Grados,ortophons,shures and AR turntable hum By: Russellc on Wed, 17 August 2005 12:22

Previous Topic:	HELP with my Acoustic Research XA!
Next Topic:	ID of LP's

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Nov 27 00:05:39 CST 2024