AudioRoundTable.com: Source » anti-skating problem

Home » Audio » Source » anti-skating problem

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: anti-skating problem [message #12332 is a reply to message #12328]

Tue, 12 July 2005 05:54

Mr Vinyl
Messages: 407
Registered: May 2009

Illuminati (1st Degree)

Hi,

Thanks for the link. I think that most people apply too much anti skating to their tone arms. I have seen cantilevers bent because of this. I use one setting for all my lp's that is a bit lighter than my tracking force.

Now don't get me started on VTA....

Mr Vinyl

Report message to a moderator

[Message index]

		anti-skating problem By: matthew Willey on Sun, 10 July 2005 07:13
		Re: anti-skating problem By: Manualblock on Sun, 10 July 2005 13:41
		Re: anti-skating problem By: Wayne Parham on Sun, 10 July 2005 17:29
		Re: anti-skating problem By: Wayne Parham on Sun, 10 July 2005 17:30
		Re: anti-skating problem By: Mr Vinyl on Mon, 11 July 2005 08:52
		Re: anti-skating problem By: matthew Willey on Mon, 11 July 2005 08:58
		Re: anti-skating problem By: Mr Vinyl on Mon, 11 July 2005 11:10
		Re: anti-skating problem By: matthew Willey on Tue, 12 July 2005 03:21
		Re: anti-skating problem By: Mr Vinyl on Tue, 12 July 2005 05:35
		A good article on Turntable set up.... By: Mr Vinyl on Tue, 12 July 2005 05:39
		Re: anti-skating problem By: Dominic on Mon, 11 July 2005 22:26
		Re: anti-skating problem By: Mr Vinyl on Tue, 12 July 2005 05:54

Previous Topic:	as the record plays my strobe doesnt show a steady mark
Next Topic:	Best Vintage Table

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Aug 01 01:19:13 CDT 2024