AudioRoundTable.com: Source » anti-skating problem

Home » Audio » Source » anti-skating problem

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: anti-skating problem [message #12327 is a reply to message #12326]

Mon, 11 July 2005 11:10

Mr Vinyl
Messages: 407
Registered: May 2009

Illuminati (1st Degree)

VTF stands for Vertical Tracking Force. It's the amount of weight that the cartridge sits on the record. It's important to get this correct because if it is not correct you can ruin your records, your needle or both. See the link below for a Shure Gauge. Each cartridge has a specific range that it must be set too. Order the Shure gauge, find out what the tracking force is for your cartridge and use the gauge to make sure it is correct. I wouldn't play any records until you set this correctly.

Hope this helps.
Mr Vinyl

http://www.amusicdirect.com/products/detail.asp?cat=&sku=ASHURSFG

Report message to a moderator

[Message index]

		anti-skating problem By: matthew Willey on Sun, 10 July 2005 07:13
		Re: anti-skating problem By: Manualblock on Sun, 10 July 2005 13:41
		Re: anti-skating problem By: Wayne Parham on Sun, 10 July 2005 17:29
		Re: anti-skating problem By: Wayne Parham on Sun, 10 July 2005 17:30
		Re: anti-skating problem By: Mr Vinyl on Mon, 11 July 2005 08:52
		Re: anti-skating problem By: matthew Willey on Mon, 11 July 2005 08:58
		Re: anti-skating problem By: Mr Vinyl on Mon, 11 July 2005 11:10
		Re: anti-skating problem By: matthew Willey on Tue, 12 July 2005 03:21
		Re: anti-skating problem By: Mr Vinyl on Tue, 12 July 2005 05:35
		A good article on Turntable set up.... By: Mr Vinyl on Tue, 12 July 2005 05:39
		Re: anti-skating problem By: Dominic on Mon, 11 July 2005 22:26
		Re: anti-skating problem By: Mr Vinyl on Tue, 12 July 2005 05:54

Previous Topic:	as the record plays my strobe doesnt show a steady mark
Next Topic:	Best Vintage Table

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Dec 22 14:00:11 CST 2024