AudioRoundTable.com: Source » Turntable thrust bearing (replacement) alternative

Home » Audio » Source » Turntable thrust bearing (replacement) alternative

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Turntable thrust bearing (replacement) alternative [message #11972 is a reply to message #11937]

Fri, 04 March 2005 13:49

Daave
Messages: 5
Registered: May 2009

Esquire

Hi Dan-
Some corrosion on the post that the cueing cam assembly rotates on was preventing it from freely turning-so the catch lever would never "lock" into the ON position. Cleaning that up, removing all of the old grease that I could find got the ole LAB 80 running again. Now if I could just get the adjustment of the Eccentric screw on bottom correct to make it turn OFF when the arm gets to the middle of a record on "Manual" play!!! Garrard engineers really made things complicated-must have all been mechanical engineers!
Cheers-Dave

Report message to a moderator

[Message index]

		Turntable thrust bearing (replacement) alternative By: DanR on Fri, 12 November 2004 07:04
		Re: Turntable thrust bearing (replacement) alternative By: Manualblock on Fri, 12 November 2004 08:33
		Re: Turntable thrust bearing (replacement) alternative By: DanR on Fri, 12 November 2004 09:27
		Re: Turntable thrust bearing (replacement) alternative By: dwebb on Mon, 31 January 2005 20:32
		Re: Turntable thrust bearing (replacement) alternative By: DanR on Tue, 01 February 2005 04:47
		Re: Turntable thrust bearing (replacement) alternative By: dwebb on Wed, 09 February 2005 22:33
		Re: Turntable thrust bearing (replacement) alternative By: DanR on Thu, 10 February 2005 06:21
		Re: Turntable thrust bearing (replacement) alternative By: Daave on Tue, 15 February 2005 20:33
		Re: Turntable thrust bearing (replacement) alternative By: DanR on Wed, 16 February 2005 05:53
		Re: Turntable thrust bearing (replacement) alternative By: Daave on Fri, 04 March 2005 13:49
		Re: Turntable thrust bearing (replacement) alternative By: DanR on Wed, 02 March 2005 07:12

Previous Topic:	Do I need a Phono pre-amp box???
Next Topic:	Systemdek 2 bearing

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 23 14:08:52 CST 2024