AudioRoundTable.com: Source » Systemdek 2 bearing

Home » Audio » Source » Systemdek 2 bearing

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Systemdek 2 bearing [message #11963 is a reply to message #11961]

Wed, 23 February 2005 06:40

Manualblock
Messages: 4973
Registered: May 2009

Illuminati (13th Degree)

You have a problem. Bad bearings are a wash. Most good guys who restore turntables use a sleeve of teflon in the bearing well. First; how did you determine there is bearing rumble, with a stethoscope?
Second you need to find out if they used an off the shelf bearing assembly or one that was custom made. Wherever they sourced the original bearing; that place may still be around. Try some research on the Vinyl Engine site, they should have the info you need. There could be a replacement since there are lots of those tables in use. Since that was an English product I bet Len Gregory has knowledge of it. Try the Cartridge Man site.
There are no quick fix's for bad bearings.
Let us know.

Report message to a moderator

[Message index]

		Systemdek 2 bearing By: newto on Wed, 23 February 2005 00:47
		Re: Systemdek 2 bearing By: BillEpstein on Wed, 23 February 2005 03:04
		Re: Systemdek 2 bearing By: DRCope on Wed, 23 February 2005 18:02
		Re: Systemdek 2 bearing By: audio origami on Wed, 02 March 2005 10:48
		Re: Systemdek 2 bearing By: Manualblock on Wed, 23 February 2005 06:40
		Re: Systemdek 2 bearing By: kyle on Mon, 28 February 2005 17:26
		Re: Systemdek 2 bearing By: DanR on Fri, 04 March 2005 07:53
		Re: Systemdek 2 bearing By: kyle on Sat, 05 March 2005 09:44
		For everyone, You're welcome. By: kyle on Thu, 10 March 2005 00:31

Previous Topic:	Turntable thrust bearing (replacement) alternative
Next Topic:	LAB 80

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Jul 14 00:15:19 CDT 2024