AudioRoundTable.com: Source » Tone arm lift pad

Home » Audio » Source » Tone arm lift pad

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Tone arm lift pad [message #11815 is a reply to message #11809]

Mon, 03 January 2005 18:45

Russellc
Messages: 397
Registered: May 2009

Illuminati (1st Degree)

Thanks for the ideas, just what I needed. I've heard of this hardening happening but is usually corrected by "roughing up" the surface, or softening it up with lighter fluid or belt dressing. In this case, its like a petrified potato chip like consistency and must be replaced.

Thanks again,
Russellc

Report message to a moderator

[Message index]

		Tone arm lift pad By: Russellc on Sun, 02 January 2005 16:39
		Re: Tone arm lift pad By: Wayne Parham on Sun, 02 January 2005 17:37
		Re: Tone arm lift pad By: Russellc on Mon, 03 January 2005 18:45
		Re: Tone arm lift pad By: Manualblock on Sun, 02 January 2005 19:22

Previous Topic:	My Project 1.2 has difficulty getting started
Next Topic:	WWW.Bestmp3guide.com

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Jul 16 17:52:52 CDT 2024