Home » Audio » General » AC/DC Electronics
Re: AC/DC Electronics [message #1165 is a reply to message #1164] Sat, 18 December 2004 06:42 Go to previous messageGo to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18794
Registered: January 2001
Illuminati (33rd Degree)
With an oscilloscope, set the input for DC coupling. You'll see an offset, and that reflects the DC level. If all you have is a DVM, you could use a 1Kohm resistor in series and a large capacitor after that in shunt to filter out the AC. The DC level is all that will remain, so just measure it with the DC voltage setting on your meter.

 
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: P.C. Audio
Next Topic: is this wayneparham.com?
Goto Forum:
  


Current Time: Tue Dec 24 10:43:13 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest