AudioRoundTable.com: Source » Re: More on DIY turntables The Sandblaster

Home » Audio » Source » Re: More on DIY turntables The Sandblaster

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: More on DIY turntables The Sandblaster [message #11519 is a reply to message #11516]

Sat, 21 February 2004 18:09

Bill Martinelli
Messages: 677
Registered: May 2009

Illuminati (1st Degree)

The mixture is mostly shot, the sand fills in between the shot and the oil is only a binder. There should only be enough oil to make a goop out of it. The mixture is very thick and has no place to run to. The top of the box is only an 1/8" gap to the sides. Just enough so the top does not contact the side.

Report message to a moderator

[Message index]

		Re: More on DIY turntables The Sandblaster By: lon on Sat, 21 February 2004 10:18
		Yup By: Wayne Parham on Sat, 21 February 2004 10:22
		Re: More on DIY turntables The Sandblaster By: Bill Martinelli on Sat, 21 February 2004 18:09
		Re: More on DIY turntables The Sandblaster By: lon on Sat, 21 February 2004 23:06
		Re: More on DIY turntables The Sandblaster By: Bill Martinelli on Sat, 21 February 2004 23:43
		Re: More on DIY turntables The Sandblaster By: Wayne Parham on Sun, 22 February 2004 10:54

Previous Topic:	More on DIY turntables The Sandblaster
Next Topic:	SACD

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Dec 01 04:59:08 CST 2024