AudioRoundTable.com: Thermionic Emissions

Home » Audio » Thermionic Emissions » Zout

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Zout [message #11165 is a reply to message #11164]

Wed, 20 July 2005 10:16

Thermionic
Messages: 208
Registered: May 2009

Master

Great post, Damir, both here and on the Group Build forum! An example of output Z and damping factor calculated using these equations:

A strapped-triode EL34 operating at 90mA Ia, using a "typical" 3K reflected impedance OPT will have an output Z of about 2.1 ohms and a damping factor of about 3.7. As mentioned in the Group Build post, there are lots of variables to consider. YMMV.

Thermionic

Report message to a moderator

[Message index]

		Zout By: Manualblock on Tue, 19 July 2005 16:14
		Re: Zout By: Damir on Wed, 20 July 2005 05:41
		Re: Zout By: Thermionic on Wed, 20 July 2005 10:16
		Re: Zout By: Manualblock on Wed, 20 July 2005 20:00
		Re: Zout By: Damir on Wed, 20 July 2005 23:52

Previous Topic:	Promise not to tell?
Next Topic:	bass preamp and 6418 pentode

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Feb 26 02:47:33 CST 2025