Home » Audio » Thermionic Emissions » 2A3 Upgrade (Paramour)
Re: 2A3 Upgrade (Paramour) [message #10567 is a reply to message #10564] Sat, 06 March 2004 16:48 Go to previous messageGo to previous message
BillEpstein is currently offline  BillEpstein
Messages: 886
Registered: May 2009
Illuminati (2nd Degree)
A zillion answers on the Bottlehead Forum but you're here, so what the heck. My experience with the 'Mours is that given the C4S, the output caps are #1 and Auricaps were great followed by Clarity. Surpriisng, the little coupling cap was a noticeable upgrade as well even tho an afterthought and all I did was replace the ceramic with a Solen.
Based on my experience with adding a choke to Ella, I think the BC-15 choke upgrade will be VERY good, replacing the whatchacallit resitor with the stock choke.
After all that, I feel that that the S.E.T. crowd is kidding itself with all this "palpable presence" stuff. These little designs roll off the treble and smear the mids so wacky speakers like Fostex and their ilk don't sound so bad. Gimme 40 or 60 Manly Push Pull EL-34 watts as G-D and Williamson intended!

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: tube sources needed
Next Topic: possible group build
Goto Forum:
  


Current Time: Fri Nov 29 23:48:59 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest