AudioRoundTable.com: Silicon Valley » DIY vs. pre-manufacturered chip amp?

Home » Audio » Silicon Valley » DIY vs. pre-manufacturered chip amp?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: DIY vs. pre-manufacturered chip amp? [message #10290 is a reply to message #10287]

Mon, 07 February 2005 23:05

Tomek-Z
Messages: 1
Registered: May 2009

Esquire

Oh, I've had four (five counting an updated powersupply) Gainclones and a 47 Labs Shigaraki. Of all these, the best is one using the Chipamps.com boards with blackgates etc.(unfortunately no more blackgates in the kit, no more being made) enclosed in the Specialized kit Gainclone case. This case has a copper heat sink, does that make a differnce? Has heavy gauge aluminum, a difference? Has Maple side panels, a difference? Anyways, it is my favorite. I did not make it though.

Report message to a moderator

[Message index]

		DIY vs. pre-manufacturered chip amp? By: JLM on Sun, 30 January 2005 13:09
		Re: DIY vs. pre-manufacturered chip amp? By: Wayne Parham on Sun, 30 January 2005 23:37
		Re: DIY vs. pre-manufacturered chip amp? By: Tomek-Z on Mon, 07 February 2005 23:05
		Re: DIY vs. pre-manufacturered chip amp? By: Wayne Parham on Tue, 08 February 2005 07:55
		Re: DIY vs. pre-manufacturered chip amp? By: Yury on Wed, 27 April 2005 05:15
		Re: DIY vs. pre-manufacturered chip amp? By: GarMan on Mon, 31 January 2005 08:32
		Re: DIY vs. pre-manufacturered chip amp? By: JLM on Mon, 31 January 2005 15:39

Previous Topic:	Sonic Impact amp-- any thoughts on it?
Next Topic:	Service Manual

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Aug 24 19:57:48 CDT 2024