AudioRoundTable.com: Thermionic Emissions

Home » Audio » Thermionic Emissions » more Pentode sacrelige

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

you read right the first! [message #9913 is a reply to message #9911]

Mon, 12 February 2007 09:33

PakProtector
Messages: 935
Registered: May 2009

Illuminati (2nd Degree)

Hey-Hey!!!,
It is indeed 750 Ohms. Since I don't need much gain, or output swing, I used a low plate load. Remember that for transconductance devices like pentodes the stage gain is ~gm*Plate-load.

The g2 voltage is 75V, and gm is published for that OP. The bias is ~5.5V established with a 100R cathode resistor. Actual plate V is about 150 as dropped from a B+ of ~200. I may even try a lower value plate load...:)
cheers,
Douglas

Report message to a moderator

[Message index]

		more Pentode sacrelige By: PakProtector on Thu, 04 January 2007 17:11
		Re: more Pentode sacrelige By: Quinnling on Mon, 15 January 2007 05:45
		Re: more Pentode sacrelige By: Norris Wilson on Sun, 28 January 2007 07:27
		Re: more Pentode sacrelige By: ChrisL on Sun, 11 February 2007 19:41
		you read right the first! By: PakProtector on Mon, 12 February 2007 09:33
		Re: you read right the first! By: ChrisL on Mon, 12 February 2007 10:11

Previous Topic:	Nuera 3403SE
Next Topic:	arent these..

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 30 23:01:24 CST 2024