AudioRoundTable.com: Source

Home » Audio » Source » to RIAA or not

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

to RIAA or not [message #97930]

Wed, 07 August 2024 21:41

gofar99
Messages: 1947
Registered: May 2010
Location: Southern Arizona

Illuminati (5th Degree)

Hi everyone. This has likely been covered somewhere in the past but as gear and software improved I figured I would inquire again. Most newer ADCs seem to have a huge S/N ratio. Usually a noise floor better than -100db and likely a headroom of at least 20db. So if the slope of the RIAA curve is about 40db it would seem reasonable to expect that the output from a phono cartridge would fit with room to spare. From my readings etc it appears that the absolute max dynamic range of an LP is about 75 db and most are far less it might seem reasonable to do the RIAA conversion in a PC. Any thoughts?

Good Listening
Bruce

Report message to a moderator

Re: to RIAA or not [message #97933 is a reply to message #97930]

Thu, 08 August 2024 08:43

Wayne Parham
Messages: 18782
Registered: January 2001

Illuminati (33rd Degree)

I think you're proposing to create an RIAA curve using a digital filter. Is that what you're saying? If so, I agree. That would be easy to do.

But I can already hear screams of horror from the analog enthusiasts. Laughing

Report message to a moderator

Re: to RIAA or not [message #97934 is a reply to message #97933]

Thu, 08 August 2024 11:00

Rusty
Messages: 1184
Registered: May 2018
Location: Kansas City Missouri

Illuminati (3rd Degree)

Is the Parks DSP phono preamp along those lines?
https://positive-feedback.com/reviews/hardware-reviews/the-parks-audio-puffin-phono-stage-etc-etc-etc-etc-etc/

Report message to a moderator

Re: to RIAA or not [message #97937 is a reply to message #97934]

Thu, 08 August 2024 21:25

gofar99
Messages: 1947
Registered: May 2010
Location: Southern Arizona

Illuminati (5th Degree)

Hi, I suspect it does that. I have a number of ADCs and DACs plus lots of software to fool around with. A quick check of Audacity indicated it was easy to create a RIAA eq. I intend to try feeding directly from a cartridge into a SIIG ADC and then save as a wave file at 34/96. Using that in Audacity apply the eq and adjust the level as needed. It would seem to be a way to do it. Dynamic range on the SIIG is 108 so it should be adequate. More to follow....

Good Listening
Bruce

Report message to a moderator

Re: to RIAA or not [message #97939 is a reply to message #97937]

Fri, 09 August 2024 09:32

Rusty
Messages: 1184
Registered: May 2018
Location: Kansas City Missouri

Illuminati (3rd Degree)

GoFar you're like Chuck Berry's song Nadine. Always up to something new.

Report message to a moderator

Re: to RIAA or not [message #97942 is a reply to message #97939]

Fri, 09 August 2024 21:14

gofar99
Messages: 1947
Registered: May 2010
Location: Southern Arizona

Illuminati (5th Degree)

Hi, I have been called a number of less flattering things. You should see some of the things I tried that didn't work. I figure if I have the idea and the parts to try it why not. It is how I learn new things. Very Happy

Good Listening
Bruce

Report message to a moderator

Previous Topic:	Marantz 6007 CD Player
Next Topic:	Unexpected upgrade

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Nov 03 05:00:15 CST 2024