AudioRoundTable.com: Pi Speakers » 4pi with 2226J (16 ohms)? .. crossover?

Home » Sponsored » Pi Speakers » 4pi with 2226J (16 ohms)? .. crossover? (4pi with 2226J (16 ohms)? .. crossover?)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

4pi with 2226J (16 ohms)? .. crossover? [message #96123]

Sat, 29 October 2022 08:07

33
Messages: 3
Registered: October 2022
Location: Hamburg

Esquire

Hi all.

I'm new on this planet.. and the 4pi has fascinated me for a long time.
I would like to buy the DIY kit, but unfortunately I live in Germany. Now I'm trying to collect the individual components.
In one forum it was mentioned that a 2226J (16 ohms) can also be used. Is that correct? What would the crossover look like for 16 ohms? Or is the 4pi with 2226J not recommended.
There's a cheap pair here in 16 ohms right now.
Can you help me?

Best regards from Hamburg
Michael

Report message to a moderator

Re: 4pi with 2226J (16 ohms)? .. crossover? [message #96124 is a reply to message #96123]

Sat, 29 October 2022 09:13

Wayne Parham
Messages: 18786
Registered: January 2001

Illuminati (33rd Degree)

I would not suggest using the 2226J. The crossover was designed for the 2226H and while its values could be adjusted, I've never measured a system with a 2226J to validate. So since you're still gathering parts, find a pair of 2226H drivers to use.

Report message to a moderator