AudioRoundTable.com: Pi Speakers » Kudos to Wayne for the 4pi and 3pi subs!

Home » Sponsored » Pi Speakers » Kudos to Wayne for the 4pi and 3pi subs!

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Kudos to Wayne for the 4pi and 3pi subs! [message #96113 is a reply to message #96112]

Sun, 23 October 2022 13:53

pjanda1
Messages: 6
Registered: March 2021

Esquire

Thanks! I was conflicted on choosing a finish pattern more typical of modern narrow baffle Scandinavian speakers, especially right now, when classic monitors are back in fashion. But, part of the damage before was because square edges are tough to keep clean on big heavy speakers, especially over soft MDF. And, if you goof up a black bevel, a paint marker will make it fairly invisible.

For those looking to achieve a similar bevel on a budget, it was this cheap table bit run 90 off from what you'd expect and set to not protrude deep enough for the thumbnail: https://www.amazon.com/Yonico-Thumbnail-Handrail-Diameter-13143/

Paul

Report message to a moderator

[Message index]

		Kudos to Wayne for the 4pi and 3pi subs! By: pjanda1 on Sun, 23 October 2022 10:16
		Re: Kudos to Wayne for the 4pi and 3pi subs! By: Rusty on Sun, 23 October 2022 13:22
		Re: Kudos to Wayne for the 4pi and 3pi subs! By: pjanda1 on Sun, 23 October 2022 13:53
		Re: Kudos to Wayne for the 4pi and 3pi subs! By: Wayne Parham on Mon, 24 October 2022 10:27

Previous Topic:	Vent size for Theater 4 Pi
Next Topic:	Pi 4 plans please

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Nov 21 19:54:55 CST 2024