AudioRoundTable.com: Craftsmen » Your go-to "holder"

Home » Audio » Craftsmen » Your go-to "holder"

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Your go-to "holder" [message #93686]

Sun, 09 May 2021 16:10

Madison
Messages: 332
Registered: June 2017

Grand Master

I rely on clamps when I cannot lay the piece down to work on it. Sometimes that won't work though, so what do you use then? I've fixed the lifted fret while lying the guitar down, but I need to hold it in place somehow while stringing it. My husband will hold it still for me, but I wondered what you all use when you need an extra set of hands.

Report message to a moderator

Re: Your go-to "holder" [message #94097 is a reply to message #93686]

Sun, 25 July 2021 07:56

Rusty
Messages: 1186
Registered: May 2018
Location: Kansas City Missouri

Illuminati (3rd Degree)

How about tape?

Report message to a moderator

Re: Your go-to "holder" [message #94913 is a reply to message #93686]

Tue, 14 December 2021 10:16

Kingfish
Messages: 555
Registered: November 2012

Illuminati (1st Degree)

Clamps, strings, or some type of heavy weight that doesn't get in the way. Typically, I have found that whenever c-clamps don't work I don't have everything positioned correctly. This happens when I'm in a hurry.

Report message to a moderator

Re: Your go-to "holder" [message #94980 is a reply to message #93686]

Mon, 20 December 2021 22:06

Miami
Messages: 115
Registered: April 2012

Viscount

How about some hardcore magnets? Velcro some magnets facing down under the body, and others facing up on a table and let those hold it in place.

Report message to a moderator

Re: Your go-to "holder" [message #95202 is a reply to message #93686]

Sun, 06 February 2022 10:20

Kingfish
Messages: 555
Registered: November 2012

Illuminati (1st Degree)

Yeah, those things come in all shapes and sizes for varying applications. Suction cups might work too, but again, heavy-duty and specifically made for what you're doing.

Report message to a moderator

Re: Your go-to "holder" [message #95413 is a reply to message #93686]

Mon, 21 March 2022 20:38

Azuri
Messages: 315
Registered: November 2012

Grand Master

Those magnets would only be as good as the velcro holding them down, though.

If c-clamps don't do the trick, imagine in your mind what would and maybe use the c-clamps in unconventional ways to get the desired effect.

Report message to a moderator

Re: Your go-to "holder" [message #95416 is a reply to message #95413]

Mon, 21 March 2022 21:53

gofar99
Messages: 1949
Registered: May 2010
Location: Southern Arizona

Illuminati (5th Degree)

I don't know about guitar strings...but when working with wires or small components I use "blue tack". Even good for delicate work like holding the tiny nuts in place when mounting phono cartridges. Those 2.5mm guys are otherwise hard to get to stay in place while holding the cartridge and trying to get the bolt through the arm and cartridge.

Good Listening
Bruce

Report message to a moderator

Re: Your go-to "holder" [message #95638 is a reply to message #93686]

Fri, 20 May 2022 08:55

Madison
Messages: 332
Registered: June 2017

Grand Master

Thanks for the tips! I'll try that blue tack stuff next time. It looks promising. I'd happily use clamps, normally, but I was worried that it would wreck the body of the guitar.

Report message to a moderator

Re: Your go-to "holder" [message #95917 is a reply to message #93686]

Sat, 20 August 2022 09:20

Porter
Messages: 77
Registered: December 2018

Viscount

Madison, I know you've finished it already, but you can use a guitar support and a neck cradle if you ever need to work on one again. They also work with other instruments. You probably don't need anything special, though. A plain yoga mat can protect against slippage, and guitars can take a decent amount of manhandling. I used to play many moons ago, before the demands of kids and work took over.

Report message to a moderator

Previous Topic:	Beyond the grave
Next Topic:	A Musical Heart

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Nov 21 09:31:15 CST 2024