AudioRoundTable.com: Speaker » Combo B&C DE250 with Altec 811

Home » Audio » Speaker » Combo B&C DE250 with Altec 811 (cross over design around 800 Hz / 1 Khz )

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Combo B&C DE250 with Altec 811 [message #95285 is a reply to message #95284]

Tue, 22 February 2022 09:24

Wayne Parham
Messages: 18786
Registered: January 2001

Illuminati (33rd Degree)

I measured the 811 horn (on-axis) with a variety of networks. You'll notice the ones without CD compensation had response that was nearly flat or just slightly falling as frequency rises. Both are pretty natural sounding. The ones with CD compensation showed response that was rising, and they sounded a little too bright.

Report message to a moderator

[Message index]

		Combo B&C DE250 with Altec 811 By: Arthur C on Thu, 20 January 2022 13:29
		Re: Combo B&C DE250 with Altec 811 By: Wayne Parham on Thu, 20 January 2022 17:02
		Re: Combo B&C DE250 with Altec 811 By: Arthur C on Fri, 21 January 2022 07:36
		Re: Combo B&C DE250 with Altec 811 By: Wayne Parham on Fri, 21 January 2022 09:14
		Re: Combo B&C DE250 with Altec 811 By: Arthur C on Mon, 24 January 2022 12:23
		Re: Combo B&C DE250 with Altec 811 By: OutOfSpace on Mon, 24 January 2022 14:54
		Re: Combo B&C DE250 with Altec 811 By: Arthur C on Tue, 22 February 2022 08:21
		Re: Combo B&C DE250 with Altec 811 By: Wayne Parham on Tue, 22 February 2022 09:24

Previous Topic:	2 pi's
Next Topic:	Ideas for large shop

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Nov 27 05:36:56 CST 2024