AudioRoundTable.com: Thermionic Emissions » Douglas, Damir, I did some more work on the 300bPP amps

Home » Audio » Thermionic Emissions » Douglas, Damir, I did some more work on the 300bPP amps

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 300bPP amps [message #9418 is a reply to message #9417]

Sun, 18 December 2005 12:51

Tre'
Messages: 34
Registered: May 2009

Baron

Damir, I have not measured the amp yet. I will bypass the cathode resistor at some point, tho Allen Wright does the "forced Class A" thing with his CCS in the cathode circuit. Lynn Olsen cautions against it.

With 72 volts bias on the output tubes I should need 144 volts peak to peak for full Class A output. Do you think that is a problem for my driver? If I were to lower the driver cathode resistor value that would lower the plate voltage and raise the max p to p output of the stage, right?

Thanks for the help...Tre'

Report message to a moderator

[Message index]

		Douglas, Damir, I did some more work on the 300bPP amps By: Tre' on Sat, 17 December 2005 13:32
		Re: Douglas, Damir, I did some more work on the 300bPP amps By: Damir on Sat, 17 December 2005 14:16
		Re: Douglas, Damir, I did some more work on the 300bPP amps By: Tre' on Sat, 17 December 2005 15:20
		300bPP amps By: PakProtector on Sat, 17 December 2005 17:30
		Re: 300bPP amps By: Tre' on Sat, 17 December 2005 19:48
		Re: 300bPP amps By: Damir on Sun, 18 December 2005 10:31
		Re: 300bPP amps By: Tre' on Sun, 18 December 2005 12:51
		Re: 300bPP amps By: Damir on Sun, 18 December 2005 14:45
		Re: 300bPP amps By: Tre' on Sun, 18 December 2005 15:32
		What would happen if....... By: Tre' on Sun, 18 December 2005 19:38
		Re: What would happen if....... By: Damir on Mon, 19 December 2005 05:54
		Re: 300bPP amps By: PakProtector on Sun, 18 December 2005 20:06
		Re: 300bPP amps By: Tre' on Sun, 18 December 2005 23:10
		typeO By: Tre' on Sun, 18 December 2005 23:18
		Re: typeO By: PakProtector on Tue, 03 January 2006 19:21
		Sweet! By: Wayne Parham on Mon, 19 December 2005 08:48
		Last picture By: Tre' on Tue, 20 December 2005 16:50
		Wrong URL, Sorry By: Tre' on Tue, 20 December 2005 16:54
		Looks great! By: Wayne Parham on Wed, 21 December 2005 08:52

Previous Topic:	Pinging MQracing
Next Topic:	NOS Tubes Picture Library to ID tubes

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Jun 13 19:12:14 CDT 2024