AudioRoundTable.com: Thermionic Emissions » Some questions on Power supplies

Home » Audio » Thermionic Emissions » Some questions on Power supplies

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Some questions on Power supplies [message #9374 is a reply to message #9370]

Mon, 28 November 2005 14:39

2wo
Messages: 44
Registered: May 2009

Baron

I think you can get the 750VCT transformer to work. If your not dead set on a choke input filter.

Go back to the example that Damir posted.(how do you do that?) Change the transformer voltage to 275, then tinker with the value of the first cap. As you slowly increase the value, the output voltage will rise.
With 10uf I was able to get ~365with 5Y3’s 10uf- 10h- 50uf With a 70ma CS...John

Report message to a moderator

[Message index]

		Some questions on Power supplies By: Manualblock on Sun, 27 November 2005 10:43
		Re: Some questions on Power supplies By: Damir on Sun, 27 November 2005 14:01
		Psud II example By: Damir on Sun, 27 November 2005 14:51
		Re: Psud II example By: Manualblock on Sun, 27 November 2005 16:31
		Re: Psud II example By: Damir on Mon, 28 November 2005 05:56
		Re: Psud II example By: Manualblock on Mon, 28 November 2005 12:41
		Re: Some questions on Power supplies By: 2wo on Sun, 27 November 2005 14:56
		Re: Some questions on Power supplies By: Manualblock on Sun, 27 November 2005 21:05
		Re: Some questions on Power supplies By: 2wo on Mon, 28 November 2005 14:39
		Re: Some questions on Power supplies By: Manualblock on Mon, 28 November 2005 19:12
		Re: Some questions on Power supplies By: 2wo on Mon, 28 November 2005 21:03
		PSUDii and settling By: PakProtector on Thu, 01 December 2005 18:29
		Re: Some questions on Power supplies By: 2wo on Mon, 28 November 2005 20:14

Previous Topic:	Anyone know how bad this is?
Next Topic:	Transformer specs

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Dec 22 06:15:58 CST 2024