AudioRoundTable.com: Thermionic Emissions » Need power supply schematic for Merlin amplifier?

Home » Audio » Thermionic Emissions » Need power supply schematic for Merlin amplifier?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Thanks Damir and Douglas, I have- [message #9306 is a reply to message #9300]

Tue, 01 November 2005 05:41

Norris Wilson
Messages: 361
Registered: May 2009

Grand Master

-a couple of Hammond 273X transformers that are rated at 350-350 and 110 mA. Will these make it in the ball park when using the 6V6 as an output tube? I am not sure how much current will be needed for good headroom and regulation.
I will play around with the Duncan power supply program to see what I can work out.
Do you have any sugestions about a good low impedance choke that will not eat up to much current? Also could use some give me some recommendations for rectifiers? My thought of a rectifier would be a Cree Shotkey type if I would need to use solid state because the power transformers voltage is too low.
Thanks for all of your help
Norris Wilson

Report message to a moderator

[Message index]

		Need power supply schematic for Merlin amplifier? By: Norris Wilson on Mon, 31 October 2005 16:01
		Re: Need power supply schematic for Merlin amplifier? By: Damir on Tue, 01 November 2005 03:44
		Re: Need power supply schematic for Merlin amplifier? By: PakProtector on Tue, 01 November 2005 04:00
		Thanks Damir and Douglas, I have- By: Norris Wilson on Tue, 01 November 2005 05:41
		my PSUDii results By: PakProtector on Wed, 02 November 2005 04:23

Previous Topic:	Ping: Speakerman57
Next Topic:	Inexpensive Used PP EL84 Recommendations, please

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Jun 25 02:16:56 CDT 2024