Any interest in 4 Pi Cabinets, Horns, DE250 Clones and single JBL 2226H Driver [message #92539] |
Fri, 30 October 2020 22:29 |
dkalsi
Messages: 6 Registered: July 2015
|
Esquire |
|
|
(Wash DC-Metro Area Only)
Hi All,
I'm looking to sell a partially complete 4 Pi Build.
I've abandoned the project mid-way. I was building a set for my parents, as I got closer to completion, my brother ended up gifting the pair that I gifted him to my parents instead.
I was contemplating completing the project, but it hit a snag. One of my JBL 2226H driver "buzzes" at low frequency (120hz and less). It may be the dust cap, it may be the coil. Don't know, but I don't plan on sinking any more money into the project.
I currently have the following:
Pair - 4Pi Cabinets - built with 18mm Baltic Birch Plywood - the enclosures were built taller and the horns were centered for aesthetic purposes. No standing wave issues with the tall cabinet - this was verified via impedance sweep and close mic measurements. The enclosures were heavily braced and were finished with water-based poly.
Pair - Wayne 4pi Horns
Pair - Denovo DNA-360 compression drivers (apparently a direct clone of the DE250)
Pair - JBL 2226H drivers, one works flawlessly, the other has a buzz at low frequency.
Not sure what is a fair price, but I was thinking $400 for all of the above?
-
Attachment: 5.jpg
(Size: 249.70KB, Downloaded 586 times)
-
Attachment: 4.jpg
(Size: 246.18KB, Downloaded 690 times)
-
Attachment: 3.jpg
(Size: 243.42KB, Downloaded 684 times)
-
Attachment: 2.jpg
(Size: 291.31KB, Downloaded 709 times)
|
|
|
|
|
|
|
|
|