Home » Sponsored » Pi Speakers » Horn loaded Corona Build
Re: Horn loaded Corona Build [message #91940 is a reply to message #91915] Sun, 24 May 2020 08:45 Go to previous messageGo to previous message
dawiipgh is currently offline  dawiipgh
Messages: 12
Registered: May 2020
Chancellor
Hi Wayne,

I've been searching through the FAQ, threads and other website locations. I found the performance data of the 4 Pi speakers:
https://www.pispeakers.com/Measurements/fourPi.html

Your note at the bottom states that "Measurements were taken at a distance of 10 feet from the baffle and drive voltage was 8.62vrms. This is equivalent to 2.83v/M and 1W/1M values since average impedance is 8Ω."

Interpreting the graph, it looks like the 4 Pi speakers clock in around 98-99 dB/W/1M. This is incredibly efficient!

I was considering purchasing an integrated Amp from Yamaha to power the 4 Pi speakers.
https://usa.yamaha.com/products/audio_visual/hifi_components/a-s301/
60 watts x 2 channels into 8 ohms (20-20,000 Hz) at 0.019% THD

This should be able to provide ample power to drive these speakers. A quick calculation taking into account 99 dB/W/1M efficient speakers and 60 Watts of Power at 8 feet listening distance in a room with speakers positioned ~2 ft from the walls gives a an estimated SPL of 115 dB. This is more than enough.

My question comes to what plate amp to use for the flanking sub. I believe I read that the driver for the sub is the Eminence Lab 12 in a large ported box tuned to 20Hz https://www.eminence.com/speakers/speaker-detail/?model=LAB_12

I was considering the Bash 300S or the Bash 500S.
https://www.parts-express.com/bash-300s-digital-subwoofer-plate-amplifier-300w-rms--300-750
or
https://www.parts-express.com/bash-500s-digital-subwoofer-plate-amplifier-500w-rms--300-752

I can't seem to find an amp that the second order roll off that is discussed here.

Any plate amp suggestions or guidance is much appreciated.

Thanks!

dawiipgh
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: 7 Pi plans
Next Topic: Subwoofer amp and crossover
Goto Forum:
  


Current Time: Fri Nov 29 02:37:35 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest