AudioRoundTable.com: Pi Speakers » SE tube output transformers to match 1Pi Speakers

Home » Sponsored » Pi Speakers » SE tube output transformers to match 1Pi Speakers

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

SE tube output transformers to match 1Pi Speakers [message #91837]

Thu, 07 May 2020 00:04

spiggs
Messages: 2
Registered: May 2020

Esquire

I am building a Tubelab SSE and looking to the next project which will be a set of speakers. The 1Pi seems to fit the bill however after looking at the impedance graph I am unsure what to choose for output transformers. My initial plan was to go with a pair of Edcor GXSE15-8-5k. However the 1Pi spends a good portion of it's range under 8 ohm dipping down to what looks like 4 ohm at 2 points. Will the 8 ohm transformers drive them ok or should I be looking at a lower output impedance?

Report message to a moderator

[Message index]

		SE tube output transformers to match 1Pi Speakers By: spiggs on Thu, 07 May 2020 00:04
		Re: SE tube output transformers to match 1Pi Speakers By: Wayne Parham on Thu, 07 May 2020 10:52
		Re: SE tube output transformers to match 1Pi Speakers By: spiggs on Thu, 07 May 2020 11:29
		Re: SE tube output transformers to match 1Pi Speakers By: Wayne Parham on Thu, 07 May 2020 11:33

Previous Topic:	3Pi or 4Pi?
Next Topic:	Request for 4 pi plans

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Nov 24 15:07:03 CST 2024