AudioRoundTable.com: Pi Speakers » 3 pi crossover upgrade

Home » Sponsored » Pi Speakers » 3 pi crossover upgrade

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

3 pi crossover upgrade [message #88729]

Sat, 25 August 2018 11:45

johnlewis1513
Messages: 2
Registered: September 2014
Location: United States

Esquire

Is there a 3 pi crossover upgrade kit? I have had my speakers for about 4 years. I upgraded the drivers at the time of building but not the crossovers.

Do we send the crossovers in or is there a kit for diy?

Thanks

Report message to a moderator

Re: 3 pi crossover upgrade [message #88734 is a reply to message #88729]

Sun, 26 August 2018 09:21

Wayne Parham
Messages: 18787
Registered: January 2001

Illuminati (33rd Degree)

There are three crossover upgrades available:

1. Upgrade coils from 18 gauge to 15 gauge
2. Upgrade resistors from generic to Mills
3. Upgrade capacitors from generic to Jantzen or Auricaps

The link below describes what you can expect from each upgrade:

Upgrades

We don't sell individual components, but we do sell assembled crossovers with any of those upgrades installed. If you want to modify/upgrade your own, you can buy the components of your choice at any electronics distributor. If you have lost the crossover schematic that shows you what parts go where, let me know and I'll resend the plans.

Report message to a moderator

Previous Topic:	2 Pi Tower plans, please
Next Topic:	Will it work? Audio in conservatorie?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 22 06:38:19 CST 2024